Система допусков на конические поверхности деталей с конусностью от 1:3 до 1:500 и длиной от 6 до 630 мм
Название (англ.):
System of cone tolerances for conical workpieces from C = 1:3 to 1:500 and lengths from 6 to 630 mm
Описание (англ.):
Specifies a system which applies the rigid pieces for which the length of the generator can be considered as practically equal to the basic cone length. Includes 18 figures, and can also be used for prismatic pieces. An annex tabulates maximum cone angle deviations.
Дата введения:
01.09.73
Дата отмены:
01.08.95
Код КГС:
Г12
Код ОКСТУ:
0074
Код ОКС(МКС):
17.040.10
Код ОКП:
0074
Нормативные ссылки:
DIN 7178-1-1974, EQV*DS/ISO 1947-1978, EQV*NF E02-300-1982, NEQ*NS 1564-1976, NEQ*OENORM ISO 1947-1983, EQV*UNI 7826-1978, EQV*BS 4500 PART 5(1988/BSI), EQV