Чертежи технические. Основные принципы нанесения допусков
Название (англ.):
Technical drawings; Fundamental tolerancing principle
Описание (англ.):
Specifies the principle of the relationship between dimensional tolerances and geometrical tolerances. It shall be applied to linear dimensions and their tolerances, angular dimensions and their tolerances and geometrical tolerances which define the following four aspects for each feature of the part: size form, orientation, and location. Refers to ISO 286/1, ISO 1101, and ISO 2692.
Дата регистрации:
01.02.86
Дата введения:
01.12.85
Код КГС:
Т52
Код ОКСТУ:
0002
Код ОКС(МКС):
01.100.20
Код ОКП:
0002
Нормативные ссылки:
BS 308 PART 2-1985, NEQ*DIN ISO 8015-1986, EQV*E04-541-1987, NEQ*E04-561-1983, EQV*E04-561-1986, EQV*NF E04-542-1987, NEQ*OENORM ISO 8015-1987, EQV*SFS-ISO 8015-1987, EQV*SS-ISO 8015-1986, NEQ*UNE 1-149-90(1990/AENOR), EQV*NF E04-541(1987/AFNOR), NEQ*NF E04-561(1983/AFNOR), EQV*OENORM ISO 8015 SUPPLEMENT 1(1988/ON), EQV*UNI ISO 8015(1989/UNI), EQV*DS/ISO 8015(/DS), EQV
Ключевые слова:
ANGULAR TOLERANCES DIMENSIONAL TOLERANCES DRAWING SYSTEM DRAWINGS ENGINEERING DRAWINGS FORM TOLERANCES FUNDAMENTAL TOLERANCES MARKING TECHNICAL DRAWINGS TOLERANCES TOLERANCES (MEASUREMENT) TOLERANCES OF POSITION TOLERANCES : MEASUREMENT