Applies to steel sheet of structural quality in the grades HR235, HR275 and HR355, usually without the use of microalloying elements, produced in thicknesses from 1,6 mm to 6 mm and widths of 600 mm and over. Specifies conditions of manufacture (steelmaking, chemical composition, chemical analysis, weldability, application, mechanical properties, surface condition), dimensionaltolerances, sampling, mechanical property tests (tensile test, bend test), retests, resubmission, workmanship, inspection and acceptance, coil size, marking, information to be supplied by the purchaser.
Заменён стандартами:
ISO 4995:2001
Заменяет стандарты:
ISO 4995(1991.04)*ISO 4995 DAM 1(1991.11)
Дата регистрации:
01.11.93
Дата введения:
01.11.93
Код КГС:
В33
Код ОКСТУ:
0970
Код ОКС(МКС):
77.140.50
Код ОКП:
0970
Нормативные ссылки:
DIN EN 10025-1991, NEQ*DIN EN 10051-1992, NEQ ISO 6892-1984*ISO 7438-1985
Ключевые слова:
DIMENSIONS HOT ROLLED IRON MARKING PRODUCTS SHEET MATERIALS SPECIFICATIONS STEELS STRUCTURAL STEELS TESTING TESTS SHEETS