Подготовка стальной основы перед нанесением красок и связанных с ними продуктов. Методы испытаний неметаллических абразивов для песко/дробеструйной очистки. Часть 3. Определение объемной плотности
Название (англ.):
Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 3: determination of apparent density
Описание (англ.):
The procedure includes drying a sufficient quantity of the sample by heating, allowing to cool to room temperature, adding distilled or deionized water to the cleaned, dried and weighed pyknometer containing 10 g of the dried sample until it is completely filled, displacing airadhering to the test portion, drying the outside of the pyknometer, reweighing the pyknometer and its contents, emptying the pyknometer, refilling with distilled or deionized water, drying the outside and weighing again. Annex A gives information on the international standards series for non-metallic blast-cleaning abrasives ISO 11126 and ISO 11127.
Дата регистрации:
01.02.94
Дата введения:
01.12.93
Код КГС:
Е29
Код ОКСТУ:
3988
Код ОКС(МКС):
25.220.10
Код ОКП:
3988
Нормативные ссылки:
DIN ISO 11127-3-1992, EQV*BS 7079 PART F13(1994/BSI), EQV*T35-509-3(1994/AFNOR), EQV*EN ISO 11127-3-1997, EQV*DIN EN ISO 11127-3-1997, EQV*NF T35-509-3(1997/AFNOR), EQV*NF EN ISO 11127-3(1997/AFNOR), EQV*BS EN ISO 11127-3(1994/BSI), EQV ISO 3696-1987*ISO 11127-1-1993
Ключевые слова:
ABRASIVES BLAST-CLEANING COATING MATERIALS DENSITY DENSITY MEASUREMENT NON-METALS NONMETALLIC NUMBER DENSITY PAINTS STEEL PRODUCTS STEELS SUBSTRATES (INSULATING) SURFACES TESTING TESTS DENSITY (MASS/VOLUME) NON METALS AREA DENSITY (NUMBER/VOLUME)