Applies to the steel grades listed in table 1, which are generally used in the work-hardened condition in the form of strip up to about 1,6 mm in thickness. The produced springs are exposed to corrosive effects and sometimes slightly increased temperatures. In addition to this part of ISO 6931, the general technical delivery requirements of ISO 404 are applicable. Annex A gives additional information.
Дата регистрации:
01.09.89
Дата введения:
15.07.89
Код КГС:
В33
Код ОКСТУ:
0980
Код ОКС(МКС):
21.160; 77.140.25
Код ОКП:
0980
Нормативные ссылки:
DIN 17224-1982, NEQ ISO 377-1985*ISO 404-1981*ISO 683-13-1986*ISO 6892-1984*ISO 7438-1985