Условия испытаний станков с револьверной головкой и одношпиндельных координатно-сверлильных станков с вертикальным шпинделем. Проверка точности
Название (англ.):
Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle; Testing of the accuracy
Описание (англ.):
Specifies both geomertrical and practical tests on these general purpose and normal accuracy drilling machines, and gives the corresponding permissible deviations which apply. It deals only with the verification of the accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.), or tocharacteristics (speeds, feeds, etc.), which shall generally be checked before the accuracy is tested. The most common configurations of these machines are given.
Дата регистрации:
01.07.75
Дата введения:
01.05.75
Код КГС:
Г89
Код ОКСТУ:
3108;3109;3810;3809
Код ОКС(МКС):
25.080.40
Код ОКП:
3108;3109;3810;3809
Нормативные ссылки:
BS 4656 PART 15-1976, NEQ*DIN 8626-3-1980, NEQ*NF E60-135-1976, EQV*UNI 7968-1979, EQV*UNE 15-312-90(1990/AENOR), EQV**NF ISO 3190(1996/AFNOR), EQV