Лаки и краски. Определение прочности пленок при изгибе на коническом стержне
Название (англ.):
Paints and varnishes; Bend test (conical mandrel)
Описание (англ.):
Is one of four documents which specify empirical test procedures for assessing the resistance of coating films to cracking and/or detachment from the substrate under different conditions of deformation. Describes a test procedure for coating ona metallic substrate when subjected to bending under standard conditions. For a multi-coat system, each coat may be tested separately or the complete system may be tested. The mandrel shall be in the form of a truncated cone. It is mounted horizontally on a base plate. An operating lever with draw bar is provided for bending the test panel. The test panels shall be of burnished steel, burnished tinplate or soft aluminium.
Дата регистрации:
01.08.84
Дата введения:
01.06.84
Код КГС:
Л19
Код ОКСТУ:
2309
Код ОКС(МКС):
87.040
Код ОКП:
2309
Нормативные ссылки:
BS 3900 PART E11-1985, EQV*DS/ISO 6860-1987, EQV*NF T30-078-1983, EQV*SFS-ISO 6860(1988/SFS), EQV*SS-ISO 6860(1990/SIS), EQV*DIN ISO 6860-1992, EQV*NEN-ISO 6860(1992/NNI), EQV*DIN EN ISO 6860-1995, EQV*EN ISO 6860-1995, EQV*NF EN ISO 6860(1995/AFNOR), EQV*BS EN ISO 6860(1985/BSI), EQV
Ключевые слова:
BEND TESTING BEND TESTS COATING MATERIALS CONICAL SHAPE DIMENSIONS HUMIDITY LACQUERS MATERIALS PAINTS SAMPLING METHODS TEST ATMOSPHERES TEST EQUIPMENT TESTING TESTS VARNISHES SAMPLING