Передачи ременные синхронные. Ремни. Часть 1. Коды шага MXL, XL, L, H, XH, и XXH. Метрические и дюймовые размеры
Название (англ.):
Synchronous belt drives; belts; part 1: pitch codes MXL, XL, L, H, XH and XXH; metric and inch dimensions
Описание (англ.):
This second edition cancels and replaces the first edition of ISO 5296:1978, as well as its addenda 1 and 2 of 1982. This part specifies the principal characteristics of synchronous endless belts for use in synchronous belt drives for mechnical power transmission and where positive indexing or synchronization may be required.
Дата регистрации:
01.09.89
Дата введения:
15.07.89
Код КГС:
Г15
Код ОКСТУ:
0073
Код ОКС(МКС):
21.220.10
Код ОКП:
0073
Нормативные ссылки:
DIN ISO 5296-1-1991, EQV*DIN ISO 5296-1984, NEQ*NF ISO 5296-1(1989/AFNOR), EQV*NEN-ISO 5296-1(1990/NNI), EQV*NF E24-301-1(1989/AFNOR), EQV*UNI ISO 5296/1(1991/UNI), EQV*NBN E24-012(1992/IBN), EQV
Ключевые слова:
BELT DRIVES BELTS CHARACTERISTICS DESIGNATION DESIGNATIONS DIMENSIONAL MEASUREMENT DIMENSIONAL MEASUREMENTS DIMENSIONS INCH LENGTH LIMIT DEVIATIONS LINE SPACINGS LOAD TRANSMISSION MEASUREMENT MECHANICAL TRANSMISSION SYSTEMS METRIC POWER TRANSMISSION BELTS POWER TRANSMISSION SYSTEMS PROPERTIES SYMBOLS SYNCHRONOUS BELT DRIVE SYNCHRONOUS BELTS SYNCHRONOUS TRANSMISSION THICKNESS TOOTHED BELTS WIDTH POWER TRANSMISSION SYSTEM MECHANICAL TRANSMISSION