Изделия крепежные. Механические свойства. Часть 1. Болты, винты и шпильки
Название (англ.):
Mechanical properties of fasteners; part 1: bolts, screws and studs
Описание (англ.):
Specifies the properties when tested at room temperature; it applies to products with nominal diameters up to 39 mm, with triangular ISO thread according to ISO 68, with diameter/pitch combinations according to ISI 261 and 262, with thread tolerance according to ISO 965-1 and -2; does not apply to set screws and similar threaded fasteners.
Заменён стандартами:
ISO 898-1:1999
Заменяет стандарты:
ISO 898 Part 1(1978)
Дата регистрации:
20.03.88 23:00:00
Дата введения:
15.02.88
Код КГС:
Г30
Код ОКСТУ:
1280
Код ОКС(МКС):
21.060.10
Код ОКП:
1280
Нормативные ссылки:
DIN ISO 898-1-1989, EQV*NBN E 27-001-1987, NEQ*EN 20898-1-1991, EQV*NBN E 27-011(1988/IBN), EQV*NEN-ISO 898-1(1989/NNI), EQV*OENORM ISO 898 Teil 1(1989/ON), EQV*SFS-ISO 898-1(1989/SFS), EQV*NS-ISO 898-1(1991/NSF), EQV*DIN EN 20898-1-1992, EQV*NF E25-100(1991/AFNOR), EQV*BS EN 20898-1(1992/BSI), EQV*NF E25-100-1(1991/AFNOR), EQV*NF EN 20898-1(1991/AFNOR), EQV*NEN-EN 20898-1(1991/NNI), EQV*UNI EN 20898/1(1991/UNI), EQV*OENORM EN 20898 TEIL 1(1991/ON), EQV*EN 20898-1(/ITM), EQV*IST L 905/EN 20898-1(/STRI), EQV*NF EN 20898-1(1992/AFNOR), EQV*SS-ISO 898-1(1991/SIS), EQV*EN 20898-1(1992/IPQ), EQV*UNE EN 20898 PARTE 1(1992/AENOR), EQV ISO 1*ISO 225*ISO 261*ISO 262*ISO 273*ISO 6157-1*ISO 6157-3*ISO 6506*ISO 6507-1*ISO 6507-2*ISO 6508*ISO 68*ISO 6892*ISO 83*ISO 965-1*ISO 965-2
Ключевые слова:
BOLTS CARBURIZING CLOSE-FIT THREADS DEFINITIONS DELIVERY CONDITIONS DESIGNATION DESIGNATIONS ELONGATION AT FRACTURE EXTERNAL-THREAD FASTENERS FASTENERS HARDNESS HARDNESS MEASUREMENT HEAT TREATMENT INSPECTION BY ATTRIBUTES LEFT-HAND SCREW THREADS MARKING MATERIALS MECHANICAL PROPERTIES MECHANICAL PROPERTIES OF MATERIALS NORMAL THREADS PROPERTIES SCREWS SCREWS (BOLTS) SPECIFICATIONS STEELS STRENGTH OF MATERIALS STUDS (FASTENERS) SURFACES TENSILE STRENGTH TENSILE TESTING TESTING TESTS THREADS YIELD STRENGTH CASE HARDENING ELONGATION AT BREAK SCREW THREADS PH AREA STUDS RESILIENCE