Авиация и космонавтика. Резьбы MJ. Часть 2. Предельные размеры болтов и гаек
Название (англ.):
Aerospace; MJ threads; part 2: limit dimensions for bolts and nuts
Описание (англ.):
Specifies these values for bolts and nuts of nominal diameter 1,6 mm to 39 mm. Values for nominal diameter 1,2 mm or less are given in ISO/R 1501. Includes nominal diameters and pitches, tolerance classes, provisions for coated threads, limit dimensions for finished parts (coated or non-coated), bolt threads, nut threads, tolerances on pitch (lead) and on half flank angle with figures and tables.
Заменён стандартами:
ISO 5855-2:1999
Заменяет стандарты:
ISO 5855-2(1981)
Дата регистрации:
15.12.89
Дата введения:
15.12.88
Код КГС:
Д15;Г30
Код ОКСТУ:
1602;7570
Код ОКС(МКС):
49.030.10
Код ОКП:
1602;7570
Нормативные ссылки:
DIN ISO 5855-2-1989, EQV*SS-ISO 5855/2(1990/SIS), EQV*NF L05-230-2(1990/AFNOR), EQV*NF ISO 5855-2(1990/AFNOR), EQV*BS 6293 PART 2(1994/BSI), EQV ISO 5855-1-1988*ISO 965-1-1980*ISO/R 1501-1970
Ключевые слова:
AEROSPACE TRANSPORT AIR TRANSPORT AIRCRAFT AIRCRAFT INDUSTRY BOLTS DESIGNATIONS DIAMETER DIAMETERS DIMENSIONAL TOLERANCES DIMENSIONS FASTENERS INDUSTRIES JOINTS MARKING MJ-THREADS NUTS NUTS (FASTENERS) SCREW THREADS SCREWS (BOLTS) SPACE TRANSPORT THREAD FORMS THREAD PITCH THREADS TOLERANCES (MEASUREMENT) NUTS : FASTENERS SCREWS TOLERANCES : MEASUREMENT