Материалы металлические спеченные, кроме твердых сплавов. Определение кажущейся твердости. Часть 1. Материалы с практически одинаковой твердостью по сечению
Название (англ.):
Sintered metal materials, excluding hardmetals; determination of apparent hardness; part 1: materials of essentially uniform section hardness
Описание (англ.):
Applies to sintered materials not subjected to heat treatment and sintered materials heat treated in such a way that hardness is essentially uniform to a depth of at least 5 mm below the surface. Gives apparatus, sampling and preparation of test pieces, test requirements, expression of results and test report. An annex contains conditions for Rockwell hardness test.
Заменяет стандарты:
ISO 4498-1(1978.07)
Дата регистрации:
25.11.91
Дата введения:
01.08.90
Код КГС:
В59
Код ОКСТУ:
1960;1970;1909
Код ОКС(МКС):
77.160,77.040.10
Код ОКП:
1960;1970;1909
Нормативные ссылки:
DIN 30911-4-1990, NEQ*DIN ISO 4498-1-1993, EQV*EN 24498-1-1993, EQV*BS EN 24498-1(1993/BSI), EQV*NF A95-321-1(1993/AFNOR), EQV*NF EN 24498-1(1993/AFNOR), EQV ISO 6506-1981*ISO 6507-1-1982*ISO 6508-1986