Applies to steel strip of structural quality in the grades HR235, HR275 and HR355, usually without the use of microalloying elements, produced in thicknesses from 0,65 mm to 12 mm inclusive and widths up to 600 mm exclusive. Specifies conditions of manufacture (steelmaking, chemical composition, chemical analysis, weldability, application, mechanical properties, surfacecondition), dimensional tolerances, sampling, mechanical property tests (tensile test, bend test, impact test), retests, resubmission, workmanship, inspection and acceptance, coil size, marking, information to be supplied by the purchaser.
Заменён стандартами:
ISO 6316:2000
Заменяет стандарты:
ISO 6316(1982.11)*ISO 6316 DAM 1(1991.11)
Дата регистрации:
01.12.93
Дата введения:
01.11.93
Код КГС:
В33
Код ОКСТУ:
0970
Код ОКС(МКС):
77.140.50
Код ОКП:
0970
Нормативные ссылки:
DIN EN 10025-1991, NEQ*DIN EN 10048-1992, NEQ ISO 148-1983*ISO 6892-1984*ISO 7438-1985
Ключевые слова:
ACCEPTANCE INSPECTION CHEMICAL COMPOSITION DIMENSIONAL TOLERANCES HOT ROLLED MARKING MECHANICAL PROPERTIES PRODUCTS PROPERTIES STEELS STRIPS STRUCTURAL STEELS TAPE TESTING TESTS ACCEPTANCE TESTING PRODUCTION