Machine tools; self-holding tapers for tool shanks
Описание (англ.):
This second edition cancels and replaces the first edition (ISO 296:1974). Specifies the dimensions of tapers for general use, smaller and larger tapers. The standard sizes of these tapers are given in table 2 (in millimetres) and table 3 (in inches), respectively. Provides for those elements which are threaded, two entirely distinct types of product according to the type of thread, M or UNC (see figures in clause 4).
Заменяет стандарты:
ISO 296(1974.06)
Дата регистрации:
01.04.91
Дата введения:
01.04.91
Код КГС:
Г27
Код ОКСТУ:
3961
Код ОКС(МКС):
25.060.20
Код ОКП:
3961
Нормативные ссылки:
DIN 228-1-1987, NEQ*DIN 228-2-1987, NEQ*BS 1660 PART 1(1992/BSI), EQV*NF E66-531(1996/AFNOR), EQV*NF ISO 296(1996/AFNOR), EQV ISO 1947-1973