Rubber; dimensional tolerances for use with products
Описание (англ.):
Specifies the classes of dimensional tolerances and their values. The tolerances are primarily intended for use with vulcanized rubbers but may also be suitable for products made of thermoplastic rubbers. A figure shows the compression mould and the moulded part, whereas the tolerances are given in eight tables. - Constitutes a technical revision of the first edition (ISO 3302-1976) including the addition of a new clause.
Заменён стандартами:
ISO 3302-1(1996.07)
Заменяет стандарты:
ISO 3302(1976.08)*ISO 3302 AMD 1(1983.09)
Дата регистрации:
11.09.90
Дата введения:
01.04.90
Дата отмены:
01.07.96
Код КГС:
Л63
Код ОКСТУ:
2502
Код ОКС(МКС):
83.140
Код ОКП:
2502
Нормативные ссылки:
DIN 7715-2-1977, NEQ*DIN 7715-3-1983, NEQ*DIN 7715-5-1979, NEQ*DIN 7715-2/A1-1990, NEQ*DIN 7715-3/A1-1990, NEQ*NEN-ISO 3302(1990/NNI), EQV*DIN 53534-1994, NEQ ISO 2230-1973*ISO 4648-1978*ISO 471-1983*ISO 48-1979