Чертежи технические. Обозначение допусков на линейные и угловые размеры
Название (англ.):
Technical drawings; Tolerancing of linear and angular dimensions
Описание (англ.):
This second edition constitutes a technical revision. Indications were written in upright lettering, but they could just as well be made in free-hand or inclined (italic) lettering without altering the meaning. For the presentation of lettering (proportions and dimensions) see ISO 3098-1. Tolerancing does not necessarily imply the use of any paticular method of production, measurement or gauging.
Заменяет стандарты:
ISO 406(1982.10)
Дата регистрации:
22.12.87
Дата введения:
01.10.87
Код КГС:
Т52
Код ОКСТУ:
0002
Код ОКС(МКС):
01.100.01
Код ОКП:
0002
Нормативные ссылки:
DIN ISO 406-1986, EQV*DIN 406-2-1981, NEQ*DS/ISO 406(1990/DS), EQV*NEN-ISO 406(1988/NNI), EQV*SFS-ISO 406(1988/SFS), EQV*SS-ISO 406(1989/SIS), EQV*SN-ISO 406(1989/SNV), EQV*IST ISO 406(1987/STRI), EQV*UNI 3976(1989/UNI), EQV*DIN 406-12-1992, NEQ*A 6065 TEIL 2(1992/ON), NEQ*DIN 406-12-1994, NEQ*NF E04-551(1995/AFNOR), EQV*NF ISO 406(1995/AFNOR), EQV