|
| Название (рус.): | Условия приемки продольно-фрезерных станков. Проверка точности. Часть 2. Станки с подвижным порталом |
| Название (англ.): | Acceptance conditions for plano-milling machines; testing of the accuracy; part 2: gantry-type machines |
| Описание (англ.): | Specifies the nomenclature used for the principal parts of the machine and the designation of the axes (in English, French and Russian and the equivalent terms in German and Italian) and the geometrical and practical tests for these milling machines, and gives the corresponding permissible deviations which apply to machines of general purpose use and normal accuracy. It deals only with theverification of the accuracy of the machine. It does not apply to the testing of the running of the machine nor to its characteristics which should generally be checked before the accuracy is tested. |
| Дата регистрации: | 01.01.89 |
| Дата введения: | 01.12.88 |
| Код КГС: | Г89 |
| Код ОКСТУ: | 3807 |
| Код ОКС(МКС): | 25.080.20 |
| Код ОКП: | 3807 |
| Нормативные ссылки: | NF E60-164(1988/AFNOR), EQV*UNI ISO 8636/2(1990/UNI), EQV ISO 230-1*ISO 7572*ISO 8636-1 |
| Ключевые слова: | ACCURACY DIMENSIONAL MEASUREMENT MACHINE TOOLS MILLING MACHINES NOMENCLATURE TERMINOLOGY TESTING TESTING CONDITIONS TESTS |
|