Приводы гидравлические и пневматические. Уплотнительные элементы. Уплотнительные кольца. Часть 1. Внутренние диаметры, поперечные сечения, допуски и идентификационные коды размеров
Название (англ.):
Fluid systems; sealing devices; O-rings; part 1: inside diameters, cross-sections, tolerances and size identification code
Описание (англ.):
The dimensions and tolerances specified in this part of ISO 3601 are suitable for any elastomeric material provided the suitable tooling is available. The figure shows the typical O-ring configuration. Table 2 contains the series G (general purpose applications), and table 3 the series A (aerospace applications). This second edition cancels and replaces the first edition (1978).
Заменён стандартами:
ISO 3601-1:2002
Заменяет стандарты:
ISO 3601-1(1978)
Дата регистрации:
02.03.90
Дата введения:
15.12.88
Дата отмены:
22.08.02
Код КГС:
Г11
Код ОКСТУ:
4180
Код ОКС(МКС):
23.100.60; 83.140.50
Код ОКП:
4180
Нормативные ссылки:
DIN 3771-1-1984, NEQ*NF F11-051(1990/AFNOR), NEQ*DS/ISO 3601-1(1992/DS), EQV*UNI ISO 3601/1(1992/UNI), EQV*DIN 3771-1-1993, NEQ*NF T47-501-1(1995/AFNOR), NEQ*NF T47-501-2(1995/AFNOR), NEQ ISO 3*ISO 48*ISO 5598